You may have heard that staining wood furniture is difficult but this isn’t always the case. It does take persistence and patience though so if you are lacking in either quality you may want to employ someone else to do it for you. Some people will tell you to simply strip off the existing finish and apply a new one. Or if you are working with bare wood you can apply the stain straight away. This is the wrong advice and if you follow it you will not get the result you were looking to achieve.

Staining wood furniture should only be done after the piece has been sanded down. It doesn’t matter if it looks clean and smooth, you need to give it a once over with the sandpaper just in case. Then when you are finished sanding you need to clean it properly. This means vacuuming and then cleaning down the area using a tack cloth to get rid of the finest particles of dust. Inspect the piece to see if there is any damage or faults that need correcting. Now is the time to deal with knots and other problems that could cause your furniture to fall apart.

If the piece was previously stained you may have to bleach it before you apply a new stain. You will only know what to do by inspecting the work after you have followed the above process. Only when you have completed all these steps are you ready to start staining. You will need to decide on the type of stain you wish to apply and this will in part be dictated by the type of wood you are working with. Some forms of staining wood furniture are best left to the experts but most people should be able to manage the easy pieces without too much difficulty.

To learn more about this and related topics, see Staining Wood Furniture. Visit us at our site, http://www.bare-wood-furniture.com/staining-wood-furniture/.

Author: Chris Hartpence
Article Source: EzineArticles.com
White Coat Hypertension

If you like wood furnishings you should find out all you can about staining wood furniture. Then you can buy bare wood furniture from unfinished stores and turn the piece into an exceptional part of your home. When you first get into using stains you should practice on throwaway pieces of wood. Then it won’t matter if your first attempts are blotchy or uneven in color.

Staining wood furniture is a skill that almost anyone can learn. It takes a little work and a lot of patience. You cannot stain the wood until it has been sanded down and is fully smooth. You also have to make sure you are working with a dust free surface or you won’t get the finish you want.

Some types of wood are more difficult to stain than others. These include pine, birch, maple and cherry so you might want to avoid these ones if you are starting out. The trick to a great finish is to partially seal the wood before you apply the stain. This will prevent the problem of some parts of the furniture being more absorbent than others.

Try applying several coats of stain to get the desired result rather than opting for one coat of a darker stain. Just like paint can look totally different on a wall then it did in a tin, so too can stains. It is easier to build up the color than it is to repair a piece that is too dark. Don’t forget that a coat of varnish will improve the look of most stains.

This is why you should test the process on some spare pieces as you can test the final results to see if they are what you want in the furniture pieces. Staining wood furniture isn’t an exact science as you are dealing with a natural material but you can make the job much easier if you follow certain steps.

To learn more about this and related topics, see Staining Wood Furniture. Visit us at our site, http://www.bare-wood-furniture.com/staining-wood-furniture/.

Author: Chris Hartpence
Article Source: EzineArticles.com
White Coat Hypertension

If you are wondering why you should choose bare wood furniture, these four reasons may help make up your mind:

Price – The fact is that furnishing your home with quality materials can cost a lot of money. If you do not want to have plastic or laminate coated furniture in your home, your options are to either buy expensive finished furniture or to have a look at the unfinished furniture store. You will be surprised at how far you can make your budget stretch when you shop in these outlet centers. Why not check it out for yourself and see.

Being unique – Some people don’t mind buying mass produced furniture but others hate the idea of owning similar items to everyone else. When you buy unfinished furniture you may start with a piece that looks the same as thousands of others but by the time you finish it yourself it can look entirely different.

Finish – the finish you achieve on bare wood furniture is completely up to you. With a little bit of time, patience and elbow grease you can create stunning pieces. The same can’t be said for furniture you buy that has already been finished particularly when mass produced. Sometimes there can be discoloration or the job hasn’t been properly completed.

Quality – when you buy unfinished furniture you can afford to buy quality wood. You may be able to buy oak, cherry or maple. These woods make beautiful natural looking furnishings that will last for years and could be passed on through the generations. You can find and finish pieces that will look like they were inherited from wealthy family members. Why not check out the deals on offer on bare wood furniture. You will soon see why this type of furnishings are becoming so popular and not just with those that are watching their budgets.

To learn more about this and related topics, see Bare Wood Furniture. Visit us on our site, http://bare-wood-furniture.com/

Author: Chris Hartpence
Article Source: EzineArticles.com
Panasonic DMC-ZS7

If you want to buy bare wood furniture to furnish your home follow these simple steps for the best results:

1) Always buy from a reputable supplier. You can find fantastic bargains but you want the pieces you buy to last and this only happens when they have been manufactured properly.

2) Buy the best quality wood you can afford. The beauty of natural wood means that the pieces will look amazing when finished. You could even sell them if or when you grow tired of your furnishings and fancy a change.

3) Always look at each piece of bare wood furniture you purchase so that you can leave those with knots or splits behind in the shop. You can repair most problems that occur in wood but why make life more difficult. There are plenty of suppliers of this style of furnishings.

4) If you are new to DIY always seek advice before you start staining the wood as different types of wood require different techniques. Don’t just assume you can paint it straight away.

5) When sanding the unfinished wood never use a sanding machine unless you are used to using these types of tools. You can do a lot of damage to the furniture in a very short space of time.

6) It makes sense to use products such as wood conditioners and stains from the same manufacturer as they should complement one another. Always read the directions of use as the process will vary depending on the type of stain, sealant or conditioner being used.

7) If you are going to stain or varnish the furniture always let the last coat dry properly before you apply the next one. This will give you a more professional finish as well as allowing you more control over the eventual color you select for your bare wood furniture.

To learn more about this and related topics, see Bare Wood Furniture. Visit us on our site, http://bare-wood-furniture.com/

Author: Chris Hartpence
Article Source: EzineArticles.com
Panasonic DMC-ZS7

You can find great deals on bare wood furniture to suit almost every room in your home. You may initially want to find a dining table and chairs but once you see the bargains that can be found you may end up refurnishing your entire home.

Buying unfinished furniture is seen by some as being too difficult. It is much easier to go to a store and buy the finished articles but often you pay for this convenience not only in dollars but also in quality. Generally speaking you can find much better wood in bare wood furniture stores than you can at furniture stores when you are spending a similar amount of money.

Some unfinished furniture stores will sell all the materials you need to achieve a great finish. They will stock a range of stains, varnish, colored sealants, wood conditioners and more. They will also have the tools you will need such as tack cloths, sanders, sanding paper and brushes. Often the staff members at these stores are experienced in working with wood and are happy to provide advice and guidance on how best to finish your purchases.

It doesn’t matter whether you are buying a dining table or a gun cabinet. You may be looking to kit out your child’s bedroom. You could even be looking for a rocking chair like Grandma used to own. A lot of nursing mothers find rocking chairs very comfortable for feeding baby and like to have one in the nursery.

Some people don’t buy unfinished furniture because it is cheaper than the finished variety but because they love the idea of working with wood. They may not be confident enough to start a furniture piece from scratch. Buying bare wood furniture allows them to practice their woodworking skills and at the same time produce something useful for the home.

To learn more about this and related topics, see Bare Wood Furniture. Visit us on our site, http://bare-wood-furniture.com/

Author: Chris Hartpence
Article Source: EzineArticles.com
iPhone iPad apps and games

If you needed a reason why you should look at bare wood furniture, the answer is the fact that it doesn’t hold any surprises. Unfinished furniture tends to be made from solid wood although there are some that are made from laminate and similar materials. As the wood is totally bare you can see exactly what you are buying. If it is described as oak you can see either the distinctive reddish color of the more common variety of oak or the slightly green tinged version of white oak.

When you buy finished pieces you may be mistaken in what you are actually purchasing. The paint or veneer finish can cover a multitude of sins. The most common mistake made is when people buy something they believe to be solid wood but later find out that it isn’t. Or they could think they have purchased genuine cherry wood only to find out it is a man made substance and not pure wood at all.

Buying bare wood furniture isn’t for everyone. You do need the time and patience to finish each piece off. Depending on the quality of the original piece this could involve a lot of work or it could just mean a simple sanding job followed by a stain finish.

If your budget will stretch you can hand your unfinished furniture to a craftsman to finish off for you. This is more expensive than doing it yourself but you should achieve a better finish unless you are accomplished in woodwork.

Some people find working with wood to be very therapeutic and enjoy getting their hands dirty. They use the opportunity of working on bare wood furniture as a way to reduce their stress levels following a hard day at the office. Whatever the reason you can produce fantastic furnishings for your home so why not take a look today.

To learn more about this and related topics, see Bare Wood Furniture. Visit us on our site, http://bare-wood-furniture.com/

Author: Chris Hartpence
Article Source: EzineArticles.com
Canadian crossborder shopping

You can buy a variety of different types of pieces in an unfinished furniture store. Why buy unfinished bedroom or dining furniture? There are a number of reasons but the main one would probably be the fact that you can finish the product in whatever way you wish. You can paint, polish, varnish, French polish or bleach the unfinished wood to produce a unique piece of furniture for a reasonable cost.

When buying wood furniture, you will need to know what type of wood it is so that you can pick the most appropriate finish. Wood is generally divided into three types being hardwood, softwood and manmade wood. Funnily enough although the names suggest otherwise, they do not signify the strength of the wood. The classification depends on the type of tree the wood originated from i.e. softwood comes trees with needlepoint leaves e.g. Evergreen trees while hardwood originates from the deciduous varieties.

Mahogany, maple, teak, walnut and oak would be well known kinds of hardwood and pine is softwood although its proper name is Deal. Cedar and Yew would also be well known softwoods. Unfinished furniture made from the hardwoods is normally more expensive.

Walnut in particular is considered one of the finest woods to be used in furniture making. The timber can be difficult to work with but the natural grains and patterns are so beautiful it is worth it. Walnut should never be painted but would suit being varnished to highlight its natural beauty.

A lot of the bare wood pieces you see in the unfinished furniture store will be made from American whitewood more commonly known as Poplar. This hardwood varies in color from white to soft brown. It is fairly featureless especially when compared to wood such as walnut but it stains well and is relatively inexpensive. There is a plentiful supply making it ideal for using in all forms of modern furniture.

Find out more about bare wood furniture, including details on what you can expect from an unfinished furniture store from an enthusiast who’s been working with bare wood for more than ten years! Check us out at http://www.bare-wood-furniture.com/unfinished-furniture-store!

Author: Chris Hartpence
Article Source: EzineArticles.com
iPhone iPad apps and games

There are many different styles of furnishings to be found at unpainted furniture stores. It has to be said most of the pieces will be mass produced reproductions. That doesn’t mean that you cannot turn it into beautiful fixtures for your home.

The key is to pick simple styles that you can polish or stain to bring out the woods natural beauty. One style that suits most homes is the Shaker style. This was developed in the period from 1770 to the 1800s. The Shakers were a religious sect originally from New England. They believed that furniture should be simple and useful but don’t let that mislead you. The very simplicity of these pieces adds to their beauty which is why the style is so popular today.

You won’t find any ornate carving or embellishment on Shaker wood furnishings. The most that these craftsmen did was to use stains to accentuate the natural beauty of the fruitwood, Maplewood or pine wood they used. You can replicate this process by staining the bare wood furniture you purchase from the unpainted furniture stores.

You can buy Shaker reproduction furniture in a finished state but often the pieces are made from cheap woods such as gum and whitewood. They are then stained to look like mahogany or oak. Buying bare wood furniture ensures that you know exactly what type of wood you are buying and you should be able to buy real pine or Maplewood for a lower price than the complete reproduction product would have cost.

You do not need to worry that you won’t have the skills to stain the furnishings yourself. All it takes is the correct preparation and the right materials and quite a bit of patience. I am sure that you will be absolutely amazed at the finished items you will be able to create from purchases made at your local unpainted furniture stores.

Find out more about unpainted furniture stores from an enthusiast who’s been working with bare wood furniture for more than ten years! Check us out at http://www.bare-wood-furniture.com/unfinished-furniture-store/

Author: Chris Hartpence
Article Source: EzineArticles.com
Canadian crossborder shopping

We all know that buying furnishings for your home is expensive but perhaps it isn’t that bad when you see the prices for patio sets. The secret to beautiful garden fixtures and fittings is to buy unfinished wood patio furniture. In this day and age, everyone is time poor so for most people the thoughts of buying unfinished wood products doesn’t even cross their mind.

But it can be a great way to secure a bargain and it doesn’t take long to turn the bare wood into a beautiful piece. You certainly do not need any special carpentry skills although patience is a must!

When buying bare wood furniture for outdoor use, you need to buy solid wood. MDF or any other manufactured materials are going to disintegrate and while they may appear cheap will prove more expensive in the long term. Teak is often used for patio furniture, hardly surprising as it was originally used in building ships as it can tolerate water! Teak is usually a golden brown color but if it isn’t what you fancy, any solid wood is fine so long as you follow the proper steps.

So what materials do you need? As the furniture is going to be outdoors, you need to make sure it is protected against adverse weather conditions. Some people think that by staining wood you are protecting it but this is not the case. You are simply coloring it. You need to use a waterproof varnish or preservative.

If you want to color the wood, you can use a colored preservative. They come in a range of colors and are applied in the same way to the unfinished wood patio furniture. Just be sure that you apply at least three coats and pay particular attention to the end grain of the wood as this is often where water damage occurs.

Find out more about unfinished furniture stores from an enthusiast who’s been working with bare wood furniture for more than ten years! Check us out at http://www.bare-wood-furniture.com/unfinished-furniture-store/

Author: Chris Hartpence
Article Source: EzineArticles.com
Low-volume PCB maker

People often ask how to paint bare wood thinking it must be a difficult process. But rest assured it isn’t. Like any job, the preparation is the key to getting the best possible finish.

The first question you need to ask is why would you want to paint bare wood furniture? If the piece is made from softwood then it makes sense as often the wood isn’t particularly pretty so a tint of color can work wonders. Stains and dyes are available in a variety of colors so you should have no problem finding one to suit your decorating scheme.

You must first ensure that the unpainted wood furniture is ready for painting. It may require sanding and if this is the case, you must be sure to remove all sanding dust before painting. Seal any knots or cracks with sealant before painting. You will need to prime the unit before applying paint as otherwise it may crack and peel off.

There are different wood paints available but most people now opt for water based acrylic paints as they are dry quickly, are easy to clean and kinder to the environment. If you are painting a piece of child’s furniture then you need to ensure that the materials are suitable for children. Kids have a habit of putting things in their mouth and this often includes tasting new furniture!

If you have purchased unpainted oak wood, then you might want to reconsider painting it. Oak is a beautiful specimen and a wax finish will help to highlight its natural beauty. You can always use a tinted wax if you want to deepen the color of the finished product.

If you have purchased a piece of bare wood furniture for use outdoors, you will need to use a colored preservative to stain and protect at the same time.

Find out more about unpainted wood furniture from an enthusiast who’s been working with it for more than ten years! Check us out at http://www.bare-wood-furniture.com/unpainted-furniture/

Author: Chris Hartpence
Article Source: EzineArticles.com
How Electric Pressure Cookers Work